m30-en – madaotek

Device quick guide

AM30 Intelligent mouse

AI mouse novice operation guide: three-step quick method

(Choose one of the modes to connect)

Step 1: Connect

USB receiver mode

Note: For this detailed procedure, please refer to the USB receiver mode connection below

Bluetooth mode

Note: For this detailed procedure, please refer to the USB receiver mode connection below

Wired mode

Note: For this detailed procedure, please refer to the USB receiver mode connection below

Step 2: Download/install

Enter the official websitehttps://madaotek.com/index.php/download-enDownload and install the client

Step 3: Use/operation

Click the mouse voice button or click the mouse AI button

USB receiver mode

1. First, turn on the mouse power switch. At this time, you can see the signal channel 1 indicator on the mouse blinking slowly;
Note :(If the indicator is not in signal channel 1, press reset to switch to signal channel 1)

2. Then, take the USB receiver from the receiver storage slot on the back of the mouse;

Note :1. When the mouse is delivered, signal channel 1 and the mouse USB receiver have been paired successfully, and the USB receiver mode is used by default

2. If you need to re-pair, in any channel, long press the reset button on the back of the mouse until the indicator starts to blink rapidly indicating that the device has entered the re-alignment state. Then, plug the USB receiver into the USB port of the computer
After a few seconds, the indicator light will be on and then off, indicating that the re-pairing is successful.

3. Finally, insert the USB receiver into the USB port of the computer, and the signal channel 1 indicator light will be on for a few seconds and then go out, indicating that the connection is successful.

Note :1. When the mouse is delivered, the default mode is USB receiver; 2. If you need to pair the device again, hold down the reset button on the back of the mouse in any channel until the indicator blinks rapidly. Then, plug the USB receiver into the USB port of the computer, wait a few seconds, the indicator will be steady on and then go out, indicating that the re-pairing is successful.

Bluetooth mode

1. First, turn on the power switch of the mouse and start the mouse. Then, press and hold the Reset button on the back of the mouse until the indicator of signal channel 1/2/3 blinks quickly, and then let go

2. Then, take the USB receiver from the receiver storage slot on the back of the mouse;

3. Finally, turn on the Bluetooth function of the device, find and connect the Bluetooth device “AM30”, the indicator of signal channel 1/2/3 will be on for a few seconds and then go off, indicating that the connection is successful.